Hi Ray, i've just measured mine to be 78-82mm

Assuming most members have a T-type already, I offer my recently purchased TC for resale. Moving Spain from UK.
Contact direct via email chris.blood60@outlook.com 07580-284236 in the 1st instance. Priced to sell @ £24k ono - 3 miles from J28 M1 UK

i reckon this will sort you Bryan ...

Is there anyone out there that has exported (for themselves) a classic car like ours from the UK to Spain (or a location in the EU) since brexit? :? If so, I'd really like to hear of the experience to determine the cost, the problems and how to do it effectively. Why? Moving to Spain so need to see ...

Hi Steve, good to see you are sorting your carbs. Note that the replacement pipes from the Octagon are 30" long. There may have been a specific route originally, but you may wish to consider it may not have been the best route! After all, they can expel petrol right onto the exhaust pipe, which to m...

Hi Lou, last year i advertised to sell a whole package of original panels (atleast 15 TC ones)for the inside areas you mentioned, only wanted £20 but no takings. I even offered them free if they were picked up. So they got throne into the skip never to be seen again.

I'm after a luggage rack for my TC; condition needs to be good or better .. chrome or stainless steel

My pennies worth would to suggest the body has been restored before and the wood has been painted/spray to protect it once again.

please be very aware that the glass doesnt just have the cutouts for the wiper motor, as there is the idle too, along with each corner having reduced cuts to cater for the 90 degree screw fixing plates ... so not just the wiper motor. I have the template as mentioned

TC windscreen glass - I am positive that the original laminated glass was not measured metrically but was of imperial size. What I have ascertained in the past few years is that you are unlikely to find nor have made a windscreen in imperial size. The nearest size i have made (20+ winsdscreens now) ...

Hi Paul, the actual dampers are all the same across the TC. However the rear arms are kinked greater on each of the rears along with the connecting arms too. So they can be re-used if the right arms can be obtained seperatley. I have searched myself for these with differculty (vintage and classic sh...

I'm now looking for a usable TC XPAG propshaft ... thought I had one but its about 8" short, likely to be a TD/F or perhaps Y-type!

bloodysalmon wrote: ↑

Mon Dec 20, 2021 12:20 pm

I'm on the lookout for a XPAG Lucas DKY4A distributor for my TC ... possibly with DA35 also stamped on it!?

found one thank you

May I just comment to the fact that these pipes are NOT greasing nipples but are indeed oiling nipples! The mistake has been done many a time and thats why they glue-up and are inaffective. Oil not grease ... throw back from theTriple-m MG's like my D-type and F-types. The old ones may look like gre...

being close to Speedograph Richfield in Arnold, Nottingham I've used them for 25+ years always with the best outcome. http://www.speedograph-richfield.com/
speak to Tim there recommended by me

Looks like you have a TC bodied pump with blanked off plate with the 2-screw/bolts. You then have a TD end piece for the pipe and underneath pressure bolt. Clearly it works ... would interesting to see if any holes have been blanked/opened-up inside? I can also see its an America TC or at least from...

i'll have a look in my boxes tomorrow, sure I do have a spare, best Chris

it'll be stuck behind the side-kick panel you see! The tags arent there to be seen ... only to be found

I hope this helps, one I had that I sold last year ...

depending what is included in your sale, box, remote, housing etc I would like to buy the rear gearbox casting mounting as mine is well broke?