Thanks Steve it worked. Bob

Hi, two weeks to go and DDF 978 should be on the road after a six year rebuild, one small issue, how do I replace the bulb in the map light on the dash. Didn't check before I fitted it to the dash, and now I need to get it fixed before I fit the under dash board, which was probably one of the easies...

Thanks for that Duncan

Thanks for that, the rubber came with the box of bits which I have now got around to fitting, I guess it came from the same source. bobC

Morning Bernd, not just the dipstick hole that needed widening also quite a chunk of rubber to allow the oil filler to pass through, and the lube point just behind the gear lever had to be removed to allow access to the grease point. Fortunately it is moulded rubber and quite easy to work and sand d...

Thanks Steve, I think that might be the answer, and it's pretty dark and out of site down there also the gearbox filler neck hole will have to be enlarged as it also does not pass through the cover.
BobC

Sorry should have said the gearbox dipstick, the holes all align on the toe board and the gear lever fits through its hole but the whole cover sits too high and on top of the filler and preventing the dip stick going into the gear box.

Hi, I'am trying to align the rubber gearbox cover on my '39 TA which is nearly ready after 7 years of hope, despair and sheer frustration. I believe that it is the same as on a TC. The cover sits too high and on top of the oil filler and the dipstick. Apart from enlarging the hole for the filler I c...