Just thought of another thing, if you have a fuel filter on the inlet of the fuel pump, get rid of it, okay to put a filter on the output, the pump will have a hard time sucking the gas thru the filter when you are up high.

Dean

Morning Bub I would look for a problems with the fuel, the gas vaporizing, the fuel pump not working, right, or the engine over heating. You may be getting fuel to the rear carb only.

Cheers
Dean

Joe I think it is you that asked the question on where to get the shim for the front end, In the states you can get mm shims that will work in various size from Metric & Multistandard, 120 Old Saw Mill River Rd, Hawthorne NY l0532 800 431 2792, you need the dia, inside and outside and thickness, var...

Hi Ray In this case it is a TA Regards Dean

Dean, What kind of car do you have??
Regards, Ray McCrary
"Speed is Life; of course Luck and Altitude are helpful, too.

I have been trying to trace my car, which was registered in Texas, at one time, Has anyone had any experience tracing a car from Texas, or are any of the members connected with the Texas State Goverment. I wrote a letter some time ago, with no reply. All suggestions, or help would be appreciated. Re...

Hi Bob Getting back to you on the clutch, I see that you have plenty of replyes. To expand on what I wrote, it is about 5/16 that needs to be removed, it is not any exact amount, but 5/16 worked okay for me. Thinking about it more I am not sure a TC starter will bolt up to a TF engine, if it does th...

Ray

Yes I have, but I do not recommend it on a TC, as you have a problem with clearance, TD or TF is find, I am running one on my TD presently

Regards
Dean

Hi Bob I have more info at home but the way to do it is to take your TF flywheel, and have it turned down so that it will take the ring gear that is used on the TC, of course you have to use the TC starter also, then you have to have the flywheel turned down on the clutch surface, it seems to me you...

Wishing all on the the list a very Merry Christmas. Can someone, maybe from England, tell me if there was a US Military base near or in Huntingdonshire in l951, if so can you give me a name of the base(s) . Cheers Dean Jensen

Bob In my part of the county, a zerk is the part that the fitting on the grease gun goes onto, most of the time they screw in, and they come in different thread sizes, but they are all shaped the same, sort of cone shape with a ball in the center, and a little spring behind the ball to keep the grea...

It has been interesting with the info on the oilers, I have one zerk that has been damaged, and I have been looking for years for a replacement. Now I know what I am looking for, does anyone on the list in the states have an extra BSF zerk that they would sell me, if so please let me know. I do not ...