Perhaps a silly question... but I don't want to force/break anything so thought I'd ask first!
I got this far (see pic attached) removing the wiper motor and can not seem to get the rest of the bolts out of the windshield rail… any suggestions please?
Also, I assume (?) that the glass goes in after the bolts for the wiper motor are in place or does the wiper motor go in afterwards? Does the glass get notched out?
Thanks, Pat
How do I get the wiper motor off?
How do I get the wiper motor off?
- Attachments
-
- IMG_7529.JPG (114.33 KiB) Viewed 2301 times
- Tim Jackson
- Posts: 107
- Joined: Fri Jan 11, 2013 8:49 am
- Location: Scottish Borders, UK
Re: How do I get the wiper motor off?
You'll have to cut them off if you can't release the nuts. Doug Pelton has the replacement parts in his mounting kit. The glass is notched for the bolts and the motor is attached after the windscreen is reassembled and back on the car. You might find these attachments useful.
Tim
Tim
- Attachments
-
- Wiper Motor mounting.pdf
- (278.65 KiB) Downloaded 243 times
-
- wiper motor TC Motoring Guild.pdf
- (91.81 KiB) Downloaded 237 times
-
- New life for an old wiper motor.pdf
- (342.5 KiB) Downloaded 197 times
1946 TC0999 / XPAG 1638
restore note
restore note
Re: How do I get the wiper motor off?
Tim, most useful information thank you! Pat