Lucas Wiper Motor

Discussion of TABC-related matters
Post Reply
User avatar
timberstone
Posts: 139
Joined: Sun Aug 13, 2017 2:08 pm
Location: Richmond VA

Lucas Wiper Motor

Post by timberstone » Sun Nov 01, 2020 6:47 pm

Just received my Lucas wiper, in pieces, from a shop that ceased to do work on it while they were in the middle of rebuilding it. Have asked around to many places for another repair shop, but now I cannot find anyone that does these Lucas Wiper Motors anymore.

Will anybody please provide a reference, or link in these posts, to a description or illustrated manual about the internal mechanisms and wiring of the Lucas Wiper Motor and Gears as fitted to the TC?
Perhaps mostly even the internal wiring connections are all that I need.
Because the mechanics of the gears seem to be solvable enough that maybe I can handle that part of the job.
Octagonally Yours, Boxley (Robert and MGTC0820)

User avatar
Steve Simmons
Site Admin
Posts: 2750
Joined: Wed Dec 26, 2012 10:48 am
Location: Southern California
Contact:

Re: Lucas Wiper Motor

Post by Steve Simmons » Sun Nov 01, 2020 7:23 pm

If you want to have it rebuilt, this guy still does it:

Jerry Felper
British Auto Electric
2722 East Carnival Ave
Anaheim, CA 92806
Tel: 714-630-1074
1949 TC8975 / XPAG 9609
1948 TC6011 / XPEG1182 (XPAG6472)
http://www.mgnuts.com

User avatar
frenchblatter
Posts: 625
Joined: Wed Apr 01, 2015 1:22 pm
Location: Royston, South Yorkshire
Contact:

Re: Lucas Wiper Motor

Post by frenchblatter » Mon Nov 02, 2020 6:47 am

Sometimes a good clean with petrol (several times) and relube with modern grease will get it working. The original grease will go rock hard and jam everything up.
Lynne & Norman Verona.

Our website

Visit our website to see what this idiot gets up to in his retirement

User avatar
Tim Jackson
Posts: 107
Joined: Fri Jan 11, 2013 8:49 am
Location: Scottish Borders, UK

Re: Lucas Wiper Motor

Post by Tim Jackson » Mon Nov 02, 2020 9:21 am

1946 TC0999 / XPAG 1638
restore note

User avatar
timberstone
Posts: 139
Joined: Sun Aug 13, 2017 2:08 pm
Location: Richmond VA

Re: Lucas Wiper Motor

Post by timberstone » Mon Nov 02, 2020 7:44 pm

Thanks to you all above for posting comments about service for the Lucas Wiper Motor.
1. Good to know that there is still at least one service depot - Jerry Felper - where to send the wiper motor -- but "... does anyone else feel an anxiety these days about more and more of our specialist suppliers reaching an age where they might just pack it in one day?" (quoted in MG Experience from Benny in San Diego) This actually may have been the reason why my Wiper was returned in pieces from the previous shop.
2. Yes, the wiper can be resurrected, at least once, by performing a good cleaning -- and surely this must be done at least after a period of decades. However, there was more wrong with this wiper than just a cleaning could cure.
3. Eureka ! Thank you Tim Jackson for the link to the article in the MG T Society Newsletter Issue 21 from December 2013 regarding the "Windscreen Wiper Motor – Type CWX". This technical article showed an exploded diagram, along with a few photos of the insides and the wiring connections, with sufficient detail that perhaps now the repair and re-assembly job may be completed from here.
Good to know that there are "sacrificial pins" anchored in the spindle shaft that are intended to break when the wipers are jammed so that damage to the gears does not result. I may be able to perform such a fix of the pins.
-- Just hoping that I am able to finish this before I also "...might just pack it in one day."

User avatar
Steve Simmons
Site Admin
Posts: 2750
Joined: Wed Dec 26, 2012 10:48 am
Location: Southern California
Contact:

Re: Lucas Wiper Motor

Post by Steve Simmons » Tue Nov 03, 2020 7:37 am

The number of specialists shuttering their doors is indeed alarming. It's one factor that continuously drives me to learn these skills for myself. Not just because it will be difficult to find people to do jobs like this for me, but also because it will become expensive. For those of us on the younger side of the hobby, there is also the concern of internal combustion engines falling out of favor altogether. What will it take to get an engine block machined when everyone is driving electric vehicles?
1949 TC8975 / XPAG 9609
1948 TC6011 / XPEG1182 (XPAG6472)
http://www.mgnuts.com

User avatar
frenchblatter
Posts: 625
Joined: Wed Apr 01, 2015 1:22 pm
Location: Royston, South Yorkshire
Contact:

Re: Lucas Wiper Motor

Post by frenchblatter » Tue Nov 03, 2020 8:08 am

Steve, I reckon they petrol engine will be around for at least another 40 years and maybe longer. I wont!
Lynne & Norman Verona.

Our website

Visit our website to see what this idiot gets up to in his retirement

User avatar
Steve Simmons
Site Admin
Posts: 2750
Joined: Wed Dec 26, 2012 10:48 am
Location: Southern California
Contact:

Re: Lucas Wiper Motor

Post by Steve Simmons » Tue Nov 03, 2020 8:38 am

I think so too, and I really hope so because I will be here too!
1949 TC8975 / XPAG 9609
1948 TC6011 / XPEG1182 (XPAG6472)
http://www.mgnuts.com

Post Reply