Best source for TC I.D. plate

[bimmrr]

Hey y'all,
I have managed to lose my original ID plate after taking it off to polish as per an earlier post. This has to rank
as one of the dumbest things I have done recently. Tore the house apart looking for it but no luck.

So, who is best source to get a new one that is not just printed but actually stamped as per the original. Got
a good source to then have engine number and car number stamped from my Healey world but if a good one in the MG world please let me know.

Thanks once again for any suggestions,
Mike

[Steve Simmons]

My first thought would be From The Frame Up.
https://fromtheframeup.com/

[bimmrr]

Yep, spoke to Doug at FTFU and the new correct ID pate is $37.00 and to emboss it with my engine and car numbers
another $10.50 or so. Got one ordered !

[bimmrr]

Got the replacement ID plate ordered from FTFU and it is going to be the one that is plated as opposed to the brass plates I have always seen. I am assuming this is correct for a late 1948, TC6515 ???

[Steve Simmons]

If I recall correctly they were all nickle plated originally, but most have worn away by now. Nickle plating isn't the most durable thing to use in an engine bay.

[Duncan M]

Mike-
I would be interested in seeing what the FTFU ID plate looks like. A pic of the whole plate would be great.
Duncan-

[bimmrr]

Here's a picture of the blank plate and they stamp my car's numbers in it for $10.50 or so. Plate itself is $37.00.

[Duncan M]

Thank you for posting that, Mike. The layout is the best I have seen for that plate.