FT27 Foglight

[hughpite]

I posted this request on the old index but will ask the same question here.
I have a FT27 foglight that appears to be missing the medallion that is on the cross bar. Does anyone have a description of this missing part, or better yet a picture?
Cheers, Hugh Pite
TC2746

[TATerry]

Hugh, some time ago, I made contact with the old gentleman in the UK that makes these. He sold me some parts to complete one of mine. I'll have to do some research to find the contact info.
Terry in Oakland

[Gene Gillam]

I wouldn't be surprised if Doug Pelton has one of these he could photograph for you and post here.

[Doug Pelton]

Hi Hugh,
The medallion is the standard Lucas Medallion, @ 5/8" diameter. Don't have 1 on hand but can get if you do not find one. Doug Pelton, FTFU

[jeffnewey]

Hugh ,
As Doug says,it is standard medallion (same as one on top of fog light body).
See attached photo.
Jeff Newey
TC0489

[jeffnewey]

Photo was too large...try this one!
Jeff N

[Bob Grunau]

Anybody have a spare, reasonably priced, FT-27 driving fog light available? I might find an SFT462 light unit to trade or cash?

[stephen stierman]

I bought a rerpro from Melvynn Rutter in the U.K. some years ago, not cheap, but nice.

[Lee Jacobsen]

I have a SFT 462 fog lamp on TC 0780. I believe it needs the FT -27. Will trade the original for a decent FT27 or even a nice repro.

[hughpite]

Thanks to all those who responed to my inquiry about the FT47. It is now assembled and complete!
Cheers, Hugh

[John Seim]

I am trying to complete a Lucas Type FT27 fog lamp for a customer.
Have a shell, with the bulb socket, and reflector. Also has the stem,
with cupped washer, star washer, and nut.
Is the lens flat? If so, can have a glass shop cut one.
Need:
Cross-bar with MG emblem.
Retaining rim with screw.
And, anything else you can see from the photos that is missing.

Thanks for any and all leads,

John Seim
Irvine, CA
TC 6590

[TATerry]

I believe this is the gent who makes the supreb FT27 repro, he will sell you parts...I bought some to finish up one that I had...Terry
send an e-mail to Keith via
kieth@ardley8142.fsnet.co.uk note that in the e-mail the i is before the e
in Keith....