wheel turns to sort low reading speedo?

Discussion of TABC-related matters
Post Reply
User avatar
tone
Posts: 43
Joined: Sat Mar 07, 2015 12:16 pm
Location: UK London

wheel turns to sort low reading speedo?

Post by tone » Fri Mar 03, 2017 12:25 pm

bit confusing title, sorry!
basically I have fitted a 5 speed box the speedo is now reading low, I think by about 10mph

I am going to have the instruments refurbished and hopefully get the speedo re calibrated but not sure [in fact haven't a clue] how to work out whatever it is I need to work out to get the speedo to read correctly

The rev counter also jumps slightly and never zeros on rest so I think that needs looking at too

Finally any thoughts on changing the low light bulbs for LED"s?

User avatar
cdrolshagen
Posts: 110
Joined: Tue Dec 29, 2015 1:30 am
Location: Soerup Germany

Re: wheel turns to sort low reading speedo?

Post by cdrolshagen » Sat Mar 04, 2017 12:17 pm

Hi tone,
I have had the same with my 1948 TC - I have fitted a Ford T9 5 speed gearbox and the speedo shows
15 % lower speed, the is normal after change ot this type of gearbox.
Your car as mine has a chronometric speedo an rev counter - these type of instruments you can`t calibtate.
What you need is a correction box to show the corrct speed.
The Richfield boys http://www.speedograph-richfield.com/index.html are able to assist you, the have done it
several hundred times.
Cheers Carl

User avatar
Steve Simmons
Site Admin
Posts: 2728
Joined: Wed Dec 26, 2012 10:48 am
Location: Southern California
Contact:

Re: wheel turns to sort low reading speedo?

Post by Steve Simmons » Sat Mar 04, 2017 12:56 pm

You can calibrate them by changing internal gears. It's a difficult job but can be done by a professional who is experienced with chronometric instruments. The needle is supposed to be jumpy and doesn't always zero when you stop. It "updates" the speed once or twice per second. If you disconnect the cable at the gearbox and slowly turn it, the needle will jump down to zero.
1949 TC8975 / XPAG 9609
1948 TC6011 / XPEG1182 (XPAG6472)
http://www.mgnuts.com

User avatar
Chris C
Posts: 12
Joined: Sun Apr 19, 2015 9:11 am
Location: Herts UK

Re: wheel turns to sort low reading speedo?

Post by Chris C » Sat Apr 01, 2017 4:06 am

Speedograph Richfield will recalibrate a chronometric speedo, I also have a type 9 gearbox and the speedometer is within a couple of miles per hour. The info they need is on their web site.

As Steve says the tacho and speedo only read every second or so.
Chris

1937 TA1643 Ex Police
1966 Jensen C-V8

User avatar
Duncan M
Posts: 840
Joined: Fri Oct 10, 2014 9:08 pm
Location: Northern California

Re: wheel turns to sort low reading speedo?

Post by Duncan M » Sat Apr 01, 2017 9:13 pm

The Jaeger Chronomeric's are a rare beast. Speedo Richfield says they will re-calibrate back to original specification, but only Smiths gauges. They then say " Other makes we will look at sympathetically and give an honest answer as to the feasibility of repair." They suggest contacting them for a chat.
here: http://www.speedograph-richfield.com/ht ... etric.html

User avatar
frenchblatter
Posts: 625
Joined: Wed Apr 01, 2015 1:22 pm
Location: Royston, South Yorkshire
Contact:

Re: wheel turns to sort low reading speedo?

Post by frenchblatter » Sun Apr 02, 2017 6:22 am

Give Philip a call here http://www.chronometricspeedos.co.uk/page2.html

He sorted my gauges. They specialise in motor bike Jaegers but the internals are the same.
Lynne & Norman Verona.

Our website

Visit our website to see what this idiot gets up to in his retirement

Post Reply