MG T-ABC

Can anyone confirm what the actual tapped thread is on the exhaust manifold studs please?

10 - 1.5mm



For future reference, goto this link and save it to favorites.

https://www.mgexp.com/article/xpag-xpeg-fasteners.html

Marv

See "technical articles" section of this website.

http://www.mg-tabc.org/library/fasteners.htm

I'm now sorted, the problem I had was that I had some similar bolts, which turned out to be similar, but not the same as those fitted to the inlet manifold. There was my confusion. Thanks for your help