How do I get the wiper motor off?

Discussion of TABC-related matters
Post Reply
User avatar
pleask
Posts: 70
Joined: Tue Jan 08, 2013 7:59 pm

How do I get the wiper motor off?

Post by pleask » Fri Nov 21, 2014 3:46 pm

Perhaps a silly question... but I don't want to force/break anything so thought I'd ask first!

I got this far (see pic attached) removing the wiper motor and can not seem to get the rest of the bolts out of the windshield rail… any suggestions please?

Also, I assume (?) that the glass goes in after the bolts for the wiper motor are in place or does the wiper motor go in afterwards? Does the glass get notched out?

Thanks, Pat
Attachments
IMG_7529.JPG
IMG_7529.JPG (114.33 KiB) Viewed 2299 times

User avatar
Tim Jackson
Posts: 107
Joined: Fri Jan 11, 2013 8:49 am
Location: Scottish Borders, UK

Re: How do I get the wiper motor off?

Post by Tim Jackson » Sat Nov 22, 2014 3:11 am

You'll have to cut them off if you can't release the nuts. Doug Pelton has the replacement parts in his mounting kit. The glass is notched for the bolts and the motor is attached after the windscreen is reassembled and back on the car. You might find these attachments useful.
Tim
Attachments
Wiper Motor mounting.pdf
(278.65 KiB) Downloaded 243 times
wiper motor TC Motoring Guild.pdf
(91.81 KiB) Downloaded 236 times
New life for an old wiper motor.pdf
(342.5 KiB) Downloaded 196 times
1946 TC0999 / XPAG 1638
restore note

User avatar
pleask
Posts: 70
Joined: Tue Jan 08, 2013 7:59 pm

Re: How do I get the wiper motor off?

Post by pleask » Sat Nov 22, 2014 12:53 pm

Tim, most useful information thank you! Pat

Post Reply