TC starter switch

jameshglueck · Post by **jameshglueck** » Fri Sep 04, 2015 8:40 am

How to remove the TC starter switch cap? Looks like a difficult task because of little space. Do I have to remove the starter?

Steve Simmons · Post by **Steve Simmons** » Fri Sep 04, 2015 8:45 am

There are four very small screws holding it to the starter housing. Remove those, and the switch drops away. It is tight but not impossible. I suggest disconnecting the battery before working with the switch so you don't short between the starter cable and the frame.

jameshglueck · Post by **jameshglueck** » Fri Sep 04, 2015 8:50 am

Steve Simmons wrote:There are four very small screws holding it to the starter housing. Remove those, and the switch drops away. It is tight but not impossible. I suggest disconnecting the battery before working with the switch so you don't short between the starter cable and the frame.

Thanks for your help Steve!
Jim

MG T-ABC

MG T-ABC

TC starter switch

TC starter switch

Re: TC starter switch

Re: TC starter switch