Hi all,
The attached pic shows the two connections on the back of the my dynamo and like an idiot I didn't make a note of where the wires went before I took it off! Now I've come to put it back I can't remember what wire went where! As the pic shows the stud connections are the same size so no help there.
Looking at the pic, could some kind soul tell me where the thickest wire goes please ... the stud closest to the middle, or the one furthest away.
Thank you in advance
TweedTC 0632 Cambridge UK
TC dynamo connections.
Re: TC dynamo connections.
Attachments :
This is how mine was before disassembly.i haven't got as far as you in reassembly" my engine is still on the stand.
Graham
- [url=http://www.mg-tabc.org/forum/files/archive-attachments/8C74D1A3-A4A2-4E61-8EE0-F7DBB4B6C476.JPG]8C74D1A3-A4A2-4E61-8EE0-F7DBB4B6C476.JPG[/url]
This is how mine was before disassembly.i haven't got as far as you in reassembly" my engine is still on the stand.
Graham
-
Stephen D Stierman
- Posts: 716
- Joined: Thu Dec 25, 2003 9:04 pm
Re: TC dynamo connections.
Tweed,
The thick wire goes to the right of the smaller wire, in other words it goes on the outer post.
Steve TC2911
The thick wire goes to the right of the smaller wire, in other words it goes on the outer post.
Steve TC2911