TC transmission mount fixings

Discussion of TABC-related matters
Post Reply
User avatar
Warmuthb
Posts: 90
Joined: Tue Jan 28, 2014 7:13 am
Location: Wheeling, WV USA

TC transmission mount fixings

Post by Warmuthb » Mon May 08, 2023 4:32 am

Anybody know anything about the 4 tranny mount bolts/and or screws? Seems I have 4 bolts (2 each side) and the left lower can’t be removed without jacking up the engine/tranny? Is this normal?

Brian W.

User avatar
Rob Reilly
Posts: 352
Joined: Sun Feb 07, 2021 2:05 pm
Location: Indiana, USA

Re: TC transmission mount fixings

Post by Rob Reilly » Mon May 08, 2023 5:02 am

Did somebody put the bolt in the wrong direction?
IMG_20210617_160418018.jpg
IMG_20210617_160418018.jpg (65.04 KiB) Viewed 1512 times
410-040_1.jpg
1937 TA 1271

User avatar
Steve Simmons
Site Admin
Posts: 2737
Joined: Wed Dec 26, 2012 10:48 am
Location: Southern California
Contact:

Re: TC transmission mount fixings

Post by Steve Simmons » Mon May 08, 2023 7:54 am

It doesn't matter which way the bolt is, you can still pull it off the mount straight forward. Just leave the bolt in place. I just happen to have a TC in the shop at the moment with gearbox off and the bolt still there. Here's a photo.

Or are you trying to only replace the mounts without removing gearbox? In that case yeah, you probably can't do it without raising the gearbox or cutting the bolt.
Attachments
MG TC Gearbox Mount
MG TC Gearbox Mount
trans-mount.jpg (67.12 KiB) Viewed 1503 times
1949 TC8975 / XPAG 9609
1948 TC6011 / XPEG1182 (XPAG6472)
http://www.mgnuts.com

User avatar
Warmuthb
Posts: 90
Joined: Tue Jan 28, 2014 7:13 am
Location: Wheeling, WV USA

Re: TC transmission mount fixings

Post by Warmuthb » Tue May 09, 2023 5:07 am

Steve:
O.K. That picture helps. Seems a bit wonky but with over 45 years wrenching on MGs, I can understand.

Brian W.

Post Reply