Instrument panel
-
- Posts: 55
- Joined: Mon Jan 07, 2013 9:28 am
Instrument panel
Before I spray my early TC instrument panel, should it be a matt black or satin black finish? Thank you.
- Steve Simmons
- Site Admin
- Posts: 2736
- Joined: Wed Dec 26, 2012 10:48 am
- Location: Southern California
- Contact:
Re: Instrument panel
Satin would be closer to original.
Re: Instrument panel
Of course the exception is the EXU panel. Variouly described as bronze or gold, this unrestored dash in TC9866 appears to be more of a brown flesh tone, but who knows what the paint looked like 75 years ago? The EXU panel also differs in having no labels or any sort.
- Steve Simmons
- Site Admin
- Posts: 2736
- Joined: Wed Dec 26, 2012 10:48 am
- Location: Southern California
- Contact:
Re: Instrument panel
The shift knob must be original. It's so old there's nothing left but bones!
Late home market also had a tan/bronze dash. I used the Moss paint and it's definitely more bronze. The tan on your panel looks very similar to side curtain frame tan. I don't have letters, because I haven't found a good way to apply them. I don't like stickers.
Late home market also had a tan/bronze dash. I used the Moss paint and it's definitely more bronze. The tan on your panel looks very similar to side curtain frame tan. I don't have letters, because I haven't found a good way to apply them. I don't like stickers.
- Attachments
-
- TC Dash Panel
- dash-center.jpg (83.73 KiB) Viewed 1435 times
Re: Instrument panel
Been in a sock drawer since 1952. Same with the alum intake manifold bits.
Re: Instrument panel
When I bought TC6468 in 1966 (in the UK) it sported the gold instrument panel on Rexine dash, 'EX-U' steering wheel and the 'Made in England' scuttle plate fitted to some later cars sold in the UK. It also wore 16" wheels perhaps hinting at a previous race history. After its restoration many years later I chose a colour for the trim that didn't sit well with the gold panel so this was refinished in satin black (without lettering) and the decayed EX-U wheel replaced with a modern Bluemels repro. At the same time I replaced the electrical sockets in the panel with a two-way toggle switch for the new indicators and used the old '30 mph' warning lamp as the witness lamp.
Incidentally another hint at a race history is the spare spark plug bracket fitted to the scuttle - I'm presuming this was not a standard MG acessory but does anyone else have something similar fitted?
Since the car can now hardly be called 'original' by any standard - only the chassis, bonnet and scuttle metalwork were retained in the rebuild - I feel content that the car at least retains the spirit of the original.Incidentally another hint at a race history is the spare spark plug bracket fitted to the scuttle - I'm presuming this was not a standard MG acessory but does anyone else have something similar fitted?
- Steve Simmons
- Site Admin
- Posts: 2736
- Joined: Wed Dec 26, 2012 10:48 am
- Location: Southern California
- Contact:
Re: Instrument panel
I believe many pre-war cars had spark plug holders fitted, but postwar is all aftermarket.
- Rob Reilly
- Posts: 352
- Joined: Sun Feb 07, 2021 2:05 pm
- Location: Indiana, USA
Re: Instrument panel
The panel on my TA looked to me like it might have been gloss black.
Original MG T Series by Clausager just says chromed with black center, but he shows a close-up of a gloss black one.
Original MG T Series by Clausager just says chromed with black center, but he shows a close-up of a gloss black one.
1937 TA 1271