T a master cylinder

Mick bibby · Post by **Mick bibby** » Sun Sep 15, 2024 2:48 am

Hi can anyone tell me how tall my master cylinder should be on my TA , I think the one I’ve got is a TC
I thought I had done the hard bit but I’ve got bogged down with a million small details I don’t have ,
Ignore the the partial dash picture
Cheers

Rob Reilly · Post by **Rob Reilly** » Sun Sep 15, 2024 2:32 pm

My car has been converted to a TD master.
This is all I could find for TA. It's from the Instruction Manual for the T Midget.
Maybe you could print it and scale the picture to get an idea of the size.

MGTA Lockheed Brake Master Cylinder.pdf: (55.53 KiB) Downloaded 40 times

MGTA Lockheed Brake Master Cylinder.doc: (146 KiB) Downloaded 36 times

Duncan M · Post by **Duncan M** » Mon Sep 16, 2024 10:03 am

The master cylinder and tin can reservoir shown are identical for TA TB and TC. What screws on to one end is different.

Mick bibby · Post by **Mick bibby** » Mon Sep 16, 2024 10:32 am

I have a mate who has an early cycle wing TA and his is different, I found this on an article about rebuilding an MPJG

Duncan M · Post by **Duncan M** » Mon Sep 16, 2024 6:51 pm

Interesting. Doug is usually more accurate on things like that. BR190, BR192 and BR196 are all the same tin can shown.
https://fromtheframeup.com/collections/brakes

MG T-ABC

MG T-ABC

T a master cylinder

T a master cylinder

Re: T a master cylinder

Re: T a master cylinder

Re: T a master cylinder

Re: T a master cylinder