MG Ausca

Forum for off-topic matters. NO politics or religion.
Post Reply
User avatar
Jim Shade
Posts: 62
Joined: Sun Dec 30, 2012 9:29 pm
Location: West Covina California USA
Contact:

MG Ausca

Post by Jim Shade » Fri Mar 01, 2013 6:59 am

Never heard of an MG Ausca

go to - http://aussieroadracing.homestead.com/Charge-Bros.html

then scroll down to the red car
Attachments
mg ausca.jpg
mg ausca.jpg (108.58 KiB) Viewed 5593 times
Jim Shade
West Covina CA, USA
(626) 332-2938

User avatar
Claude Lardans
Posts: 45
Joined: Mon Jan 07, 2013 10:52 pm

Re: MG Ausca - MG OSCA

Post by Claude Lardans » Sat Mar 02, 2013 1:59 am

Hello Jim,

See O.S.C.A in Wikipedia for more informations:
Officine Specializzate Costruzioni Automobili - Fratelli Maserati SpA (established 1947 in Bologna, discontinued 1967) was an Italian brand of sports car automobiles, usually abbreviated to O.S.C.A., OSCA or Osca.

I think this is an MG OSCA - MG for frame, engine and OSCA for the body.

Best Regards,

Claude Lardans - TC6637 - France

User avatar
jeffnewey
Posts: 21
Joined: Fri Jan 04, 2013 5:05 pm
Location: Newcastle NSW .Australia

Re: MG Ausca

Post by jeffnewey » Sat Mar 02, 2013 9:43 pm

Afraid Claude is wrong...it really is AUSCA.The body shell is F/glass and copied from a 50s Maserati A6G.
The original Ausca Special carrying this shell is a famous Holden engined special built by Paul England in Melbourne.
Quite a number of body shells were manufactured and fitted to various MG and Holden specials,many still competing in historic races today.
A point of interest is that Magnette K3004 had one of these bodies for some years when raced by Jim Gullan....Frank Bett restored it with an Ulster style body and it now close to the finish of another (very correct) restoration here in Australia.
Jeff Newey
TC0489
Australia

User avatar
Peter Linn
Posts: 2
Joined: Sat Mar 30, 2013 12:00 am

Re: MG Ausca

Post by Peter Linn » Sat Mar 30, 2013 12:20 pm

Hi Jim

I'm currently building a car using an original Ausca body on a Healey 100/4 chassis, and using an Alfa 1750 motor. About 20 of these bodies were made and fitted to various proprietary chassis. I have another 100/4 which now has a one off coupe body that was raced with an Ausca body in the '50s. I'm aware of about half a dozen cars still in existence, but the one in your photo is hew to me. Do you have any history? Where was the photo taken?

Cheers

Peter Linn
Brisbane Oz

User avatar
Peter Linn
Posts: 2
Joined: Sat Mar 30, 2013 12:00 am

Re: MG Ausca

Post by Peter Linn » Sat Mar 30, 2013 12:34 pm

Hi Jim

I'm currently building a car using an original Ausca body on a Healey 100/4 chassis, and using an Alfa 1750 motor. About 20 of these bodies were made and fitted to various proprietary chassis. I have another 100/4 which now has a one off coupe body that was raced with an Ausca body in the '50s. I'm aware of about half a dozen cars still in existence, but the one in your photo is hew to me. Do you have any history? Where was the photo taken?

Cheers

Peter Linn
Brisbane Oz

Post Reply