Aluminum Instrument Panel?
Aluminum Instrument Panel?
Anybody ever come across an aluminum/aluminium reproduction instrument panel on a TC? Just the center section, not the entire facia.
If you don't know where you are going, any road will take you there!
- Brad P.
TD/C21325
TC0777
- Brad P.
TD/C21325
TC0777
-
Steve Simmons
- Site Admin
- Posts: 2738
- Joined: Wed Dec 26, 2012 10:48 am
- Location: Southern California
- Contact:
Re: Aluminum Instrument Panel?
Never seen one! Possibly one of the kit car companies made something?
-
Franz Tenbrock
- Posts: 573
- Joined: Wed Jul 11, 2018 9:39 am
- Location: Waltrop Germany
Re: Aluminum Instrument Panel?
Hallo
it should be easy to make one by yourself
2 years ago i have done a new door bell panel atmy door from stainless steel
i looked to the web and found a companie with a perfect tool to do it
cutworks
https://www.cutworks.com/shopSelection.html
there you can paint it and they will laser it for a good price.
so you only need the measerment
or you download freecad , draw it and upload the stl
it should be easy to make one by yourself
2 years ago i have done a new door bell panel atmy door from stainless steel
i looked to the web and found a companie with a perfect tool to do it
cutworks
https://www.cutworks.com/shopSelection.html
there you can paint it and they will laser it for a good price.
so you only need the measerment
or you download freecad , draw it and upload the stl
-
Clifford Jay Lockrow
- Posts: 23
- Joined: Tue Jan 08, 2013 12:24 pm
Re: Aluminum Instrument Panel?
Yes! A good friend made one for his td in exactly the same shape as the original but was able to szqyeeze ib a few more items. I don't recall what they were. He made it out of about 3/16" aluminum and gave it an engine turn finish. It looked quite nice. He is gone but the car was TC 5050 if you could find it. It went to California.