The subject drawing is reproduced on email and I hope it is useful to readers. It does work well. Saves me time if I send it to all T-ABC members Also sending a copy to John James, Editor OCC Bulletin, in case this information needs to be re-published 30 years after initial publication.
Regards, Bob Grunau
TB/TC Gearbox Rear Aluminum Plate re-inforcing drawing.
-
Bob and Carolyn Grunau
- Posts: 24
- Joined: Wed Nov 24, 1999 11:00 pm
-
Glenda Nelson
- Posts: 5
- Joined: Sat Dec 18, 1999 5:27 pm
TC rear gearbox cover
Hi All
With regard to Bob & Carolyn Grunau's message of 14/12, a much simpler solution to reinforcing the TC rear gearbox cover is to buy an Australian-made aluminium reinforced cover which is sold by Abingdon Spares.
Many Australian TC's have been using these covers for years without any problems.
Cheers
Ian Nelson
With regard to Bob & Carolyn Grunau's message of 14/12, a much simpler solution to reinforcing the TC rear gearbox cover is to buy an Australian-made aluminium reinforced cover which is sold by Abingdon Spares.
Many Australian TC's have been using these covers for years without any problems.
Cheers
Ian Nelson